Skip to content

A320neo Custom Events

This page is pulled externally from the A32NX repository.

Contents

  1. Autopilot
    1. Non internal events
    2. Internal events - not to be used for mapping
  2. Throttle Mapping System

Autopilot

Non internal events

  • A32NX.FCU_AP_{index}_PUSH

    • Trigger when button AP {index} is pushed on FCU

  • A32NX.FCU_AP_DISCONNECT_PUSH

    • Trigger of red AP disconnection button (sidestick)

  • A32NX.FCU_ATHR_PUSH

    • Trigger when button ATHR is pushed on FCU

  • A32NX.FCU_ATHR_DISCONNECT_PUSH

    • Trigger when red ATHR disconnection button is pushed (on throttles)

  • A32NX.FCU_SPD_INC

    • Triggered when SPD knob is clockwise dialed on FCU

  • A32NX.FCU_SPD_DEC

    • Triggered when SPD knob is anti-clockwise dialed on FCU

  • A32NX.FCU_SPD_SET

    • Triggered to set SPD/MACH value on FCU
    • Speed in knots (i.e. 250)
    • Mach * 100 (i.e. 78 for M 0.78)

  • A32NX.FCU_SPD_PUSH

    • Triggered when SPD knob is pushed on FCU

  • A32NX.FCU_SPD_PULL

    • Triggered when SPD knob is pulled on FCU

  • A32NX.FCU_SPD_MACH_TOGGLE_PUSH

    • Triggered when SPD/MACH knob is pushed on FCU

  • A32NX.FCU_HDG_INC

    • Triggered when HDG knob is clockwise dialed on FCU

  • A32NX.FCU_HDG_DEC

    • Triggered when HDG knob is anti-clockwise dialed on FCU

  • A32NX.FCU_HDG_SET

    • Triggered to set HDG/TRK value on FCU

  • A32NX.FCU_HDG_PUSH

    • Triggered when HDG knob is pushed on FCU

  • A32NX.FCU_HDG_PULL

    • Triggered when HDG knob is pulled on FCU

  • A32NX.FCU_TRK_FPA_TOGGLE_PUSH

    • Triggered when TRK/FPA knob is pushed on FCU

  • A32NX.FCU_ALT_INC

    • Triggered when ALT knob is clockwise dialed on FCU
    • Parameter value can be used to set the increment: Value | Meaning --- | --- 0 | Use FCU setting 100 | 100 1000 | 1000

  • A32NX.FCU_ALT_DEC

    • Triggered when ALT knob is anti-clockwise dialed on FCU
    • Parameter value can be used to set the decrement: Value | Meaning --- | --- 0 | Use FCU setting 100 | 100 1000 | 1000

  • A32NX.FCU_ALT_SET

    • Triggered to set ALT value on FCU
    • Value is rounded to 100 ft

  • A32NX.FCU_ALT_INCREMENT_TOGGLE

    • Triggered to toggle ALT increment value on FCU

  • A32NX.FCU_ALT_INCREMENT_SET

    • Triggered to set ALT increment value on FCU
    • Value can be either 100 or 1000, others are ignored

  • A32NX.FCU_ALT_PUSH

    • Triggered when ALT knob is pushed on FCU

  • A32NX.FCU_ALT_PULL

    • Triggered when ALT knob is pulled on FCU

  • A32NX.FCU_VS_INC

    • Triggered when VS knob is clockwise dialed on FCU

  • A32NX.FCU_VS_DEC

    • Triggered when VS knob is anti-clockwise dialed on FCU

  • A32NX.FCU_VS_SET

    • Triggered to set VS/FPA value on FCU
    • VS in feet per minute (i.e. 500 for 500 ft/min)
    • FPA * 10 (i.e. 15 for 1.5°)

  • A32NX.FCU_VS_PUSH

    • Triggered when V/S knob is pushed on FCU

  • A32NX.FCU_VS_PULL

    • Triggered when V/S knob is pulled on FCU

  • A32NX.FCU_LOC_PUSH

    • Triggered when LOC button is pushed on FCU

  • A32NX.FCU_APPR_PUSH

    • Triggered when APPR button is pushed on FCU

  • A32NX.FCU_EXPED_PUSH

    • Triggered when EXPEDITE button is pushed on FCU

  • A32NX.FMGC_DIR_TO_TRIGGER

    • When triggered, the Autopilot is pushed into NAV mode

Internal events - not to be used for mapping

  • A32NX.FCU_TO_AP_HDG_PUSH

    • Triggered after HDG knob is pushed on FCU to notify autopilot

  • A32NX.FCU_TO_AP_HDG_PULL

    • Triggered after HDG knob is pulled on FCU to notify autopilot

  • A32NX.FCU_TO_AP_VS_PUSH

    • Triggered after V/S knob is pushed on FCU to notify autopilot

  • A32NX.FCU_TO_AP_VS_PULL

    • Triggered after V/S knob is pulled on FCU to notify autopilot

  • A32NX.ATHR_RESET_DISABLE

    • Resets permanently disabled A/THR system (after pressing ATHR disconnect for at least 15 s)

Throttle Mapping System

  • A32NX.THROTTLE_MAPPING_SET_DEFAULTS

    • When triggered the throttle mapping configuration resets to default values

  • A32NX.THROTTLE_MAPPING_LOAD_FROM_FILE

    • When triggered the throttle mapping configuration is loaded from file

  • A32NX.THROTTLE_MAPPING_LOAD_FROM_LOCAL_VARIABLES

    • When triggered the throttle mapping configuration is loaded from local variables (to test them)

  • A32NX.THROTTLE_MAPPING_SAVE_TO_FILE

    • When triggered the throttle mapping configuration is saved from file
Last update: April 18, 2022
Back to top